From GridLAB-D Wiki
(Redirected from Schedule (directive))
Jump to: navigation, search

Schedules are used to defined a value that changes over time in a pre-defined manner. All times in schedules are considered in local time, including timezone offset and daylight-saving/summer time offsets. Schedules are used by loadshapes and by transforms to apply the current value to other built-in types.

GLM

The general form of a simple schedule is

 schedule my_schedule {
   minutes hours days months weekdays value // normal GLM comments
   minutes hours days months weekdays value # schedule-specific comments
   minutes hours days months weekdays value; minutes hours days months weekdays value // semicolon or line delimited
 }

The schedule directive can contain either a simple schedule, such as

 schedule officehours {
   * 8-17 * * 1-5 # M-F 8a to 5p
 }

or a complex schedule with multiple blocks, such as

 schedule officehours {
   weekdays {
     * 8-16 * * 1-5 # Monday through Friday, 8am to 5pm
   }
   weekends {
     * 9-11,13-15 * * 6 # Saturdays, 9am-noon and 1pm to 4pm
   }
 }

If you want to provide values for each time interval, they can be listed after the time specification, such as

 schedule tou_price {
    * 21-8 * * 1-5 35 # weekdays 9pm-9am, $35
    * 9-20 * * 1-5 135 # weekdays 9am-9pm, $135
    * * * * 6-0 35 # weekends, $35
 }

Omitted values on schedule items take on the default value of 1. Omitted times in the schedule take on the default value of 0.

Limitations

There may be no more than 4 blocks, and each block may not contain more than 63 distinct non-zero values. Although you may have more than 64 schedule entries in a block, the number of distinct values cannot exceed 64, and zero is always a value. If you have defined more than 63 distinct values, you can either limit the resolution over the dynamic range, or you can use a orphaned player (i.e., having no parent) as a source instead.

Normalization

Some schedules need to be normalized before they are used, depending on the application (e.g., loadshapes). When normalization takes place it is done separately over each block. The (optionally weighted) sum of the values given within the block is the normalization coefficient — each value in the block is divided by the sum of all the values in the block. Some applications may need the signed sum and others may use the sum of the absolute values.

When weighting is used it is based on the fraction of minutes over which the value applies with respect to the total minutes over which the block applies. Only minutes that are explicitly listed in the block are count—omitted times (which are associated with the value 0.0) are ignored. If you wish to have the value 0 counted in the weighting, you must include the times for which it applies as well.

Normalization is controlled using the following options

normal
enables normalization so that all values in each block are divided by the sum of the values in the block.
absolute
normalization sums uses absolute values instead signed values. Its inclusion implies normal.
weighted
normalization sums uses time-weighted values instead of simple values. Its inclusion implies normal.

Normalization options should be provided in-line, such as

 schedule demand {
    weighted; 
    * 21-8 * * 1-5 1.2 # weekdays 9pm-9am, weeknights
    * 9-20 * * 1-5 1.5 # weekdays 9am-9pm, weekdays
    * * * * 6-0    0.8 # weekends, holidays
 }

which enables normalization using time-weighted values.

Nonzero

The nonzero flag can be used to ensure that the schedule does not contain any undefined or zero values:

 schedule demand {
    nonzero; 
    * 21-8 * * 1-5 1.2 # weekdays 9pm-9am, weeknights
    * 9-20 * * 1-5 1.5 # weekdays 9am-9pm, weekdays
    * * * * 6-0    0.8 # weekends, holidays
 }

Positive

The positive flag can be used to ensure that the schedule does not contain any negative values:

 schedule demand {
    positive; 
    * 21-8 * * 1-5 1.2 # weekdays 9pm-9am, weeknights
    * 9-20 * * 1-5 1.5 # weekdays 9am-9pm, weekdays
    * * * * 6-0    0.8 # weekends, holidays
 }

Boolean

The boolean flag can be used to ensure that the schedule contains on 0 or 1 values:

 schedule demand {
    boolean; 
    * 21-8 * * 1-5 1 # weekdays 9pm-9am, weeknights
    * 9-20 * * 1-5 1 # weekdays 9am-9pm, weekdays
    * * * * 6-0    0 # weekends, holidays
 }

Absolute

The absolute flag can be used to ensure that the schedule normalization uses only positive magnitudes:

 schedule demand {
    absolute; 
    * 21-8 * * 1-5 1.2 # weekdays 9pm-9am, weeknights
    * 9-20 * * 1-5 1.5 # weekdays 9am-9pm, weekdays
    * * * * 6-0    0.8 # weekends, holidays
 }

Interpolation  New in 3.1! 

The interpolate flag can be used to ensure that values used are interpolated linearly for times between schedule changes. Warning: use of this option may cause answers to vary depending on when objects update.

Caveats

There are some notable differences from the cron syntax:

  1. The alternate use of day and weekday is not supported. If both day and weekday are not *, they are considered as day AND weekday rather than OR.
  2. The step by syntax (using /) is not supported.
  3. The special keywords (e.g., @hourly, @daily) are not supported.
  4. The weekday 7 refers to holidays, which can occur any day of the week. Holidays are not supported yet, but will be someday.

Because all times are considered in local time, there is a possibility that scheduled changes during on the daylight-savings/summer time (DST) shifts could result in a missing or duplicate value. For example, scheduling an event at 2am the night DST ends may result in a duplicate value. The solution is to schedule the event either before or after am so the ambiguity is resolved internally as appropriate. Similarly, scheduling an event at 2am the night DST starts could result in a gap in the schedule, a problem also resolved by scheduling the event either before or after 2am so the gap is automatically filled by the schedule compiler.

See also