From GridLAB-D Wiki
TODO: This page needs to be completed.
Clotheswasher - Residential Clotheswasher (explicit model)
Synopsis
object clotheswasher:0 {
// residential_enduse properties
shape "type: unknown";
load "power_factor: 0.950000; power.r: 0.000000";
energy +0+0i kVAh;
power +0+0i kVA;
peak_demand +0+0i kVA;
heatgain +0 Btu/h;
cumulative_heatgain +0 Btu;
heatgain_fraction +0.5 pu;
current_fraction +0 pu;
impedance_fraction +0 pu;
power_fraction +0 pu;
power_factor +0.95;
constant_power +0+0i kVA;
constant_current +0+0i kVA;
constant_admittance +0+0i kVA;
voltage_factor +0 pu;
breaker_amps +0 A;
configuration IS110;
override NORMAL;
power_state OFF;
// clotheswasher properties
motor_power +0.227965 kW;
circuit_split +0;
queue +0 unit;
demand +0 unit/day;
energy_meter +0+0i kWh;
stall_voltage +0 V;
start_voltage +0 V;
clothesWasherPower +0;
stall_impedance +0+0i Ohm;
trip_delay +0 s;
reset_delay +0 s;
Is_on +0;
normal_perc +0.5;
perm_press_perc +0.8;
NORMAL_PREWASH_POWER +20;
NORMAL_WASH_POWER +40;
NORMAL_SPIN_LOW_POWER +60;
NORMAL_SPIN_MEDIUM_POWER +150;
NORMAL_SPIN_HIGH_POWER +220;
NORMAL_SMALLWASH_POWER +25;
NORMAL_PREWASH_ENERGY +14400;
NORMAL_WASH_ENERGY +9600;
NORMAL_SPIN_LOW_ENERGY +7200;
NORMAL_SPIN_MEDIUM_ENERGY +18000;
NORMAL_SPIN_HIGH_ENERGY +26400;
NORMAL_SMALLWASH_ENERGY +3000;
PERMPRESS_PREWASH_POWER +20;
PERMPRESS_WASH_POWER +40;
PERMPRESS_SPIN_LOW_POWER +60;
PERMPRESS_SPIN_MEDIUM_POWER +150;
PERMPRESS_SPIN_HIGH_POWER +220;
PERMPRESS_SMALLWASH_POWER +25;
PERMPRESS_PREWASH_ENERGY +14400;
PERMPRESS_WASH_ENERGY +9600;
PERMPRESS_SPIN_LOW_ENERGY +7200;
PERMPRESS_SPIN_MEDIUM_ENERGY +18000;
PERMPRESS_SPIN_HIGH_ENERGY +26400;
PERMPRESS_SMALLWASH_ENERGY +3000;
GENTLE_PREWASH_POWER +20;
GENTLE_WASH_POWER +40;
GENTLE_SPIN_LOW_POWER +60;
GENTLE_SPIN_MEDIUM_POWER +150;
GENTLE_SPIN_HIGH_POWER +220;
GENTLE_SMALLWASH_POWER +25;
GENTLE_PREWASH_ENERGY +14400;
GENTLE_WASH_ENERGY +9600;
GENTLE_SPIN_LOW_ENERGY +7200;
GENTLE_SPIN_MEDIUM_ENERGY +18000;
GENTLE_SPIN_HIGH_ENERGY +26400;
GENTLE_SMALLWASH_ENERGY +3000;
queue_min +0 unit;
queue_max +0 unit;
clotheswasher_run_prob +0;
state STOPPED;
spin_mode SPIN_LOW;
wash_mode NORMAL;
}
See also
- Residential module
- User's Guide
- Appliances
- house class – Single-family home model.
- residential_enduse class – Abstract residential end-use class.
- occupantload – Residential occupants (sensible and latent heat).
- ZIPload – Generic constant impedance/current/power end-use load.
- Technical Documents